1962-1965 Falcon/Comet Do-It-Yourself Heavy Duty Adjustable Lower Control Arm Kit, LCA-DIY-1001
Build-to-order purchases being taken at this time. Please allow up to 4 to 5 days for us to build your parts and to get them powder coated before shipping. We will notify you by email when your parts are nearing completion.
As an alternative to our complete Heavy Duty Adjustable Lower Control Arms, we offer this Adjustable Lower Control Arm Do-It-Yourself Kit for 62-65 Falcon or Comet. This kit comes with everything you need to turn your stock LCAs into heavy duty units that are adjustable and can be used to adjust camber without having to install vario centric camber kits on your car.
With the small end and weakest portion of the LCA eliminated and the boxing plate added, this becomes one very strong unit.
Kit includes threaded weld-in assemblies, self-lubricating high strength rod ends, 13 gauge boxing plates, bushings, spacers and rod end seals. LCAs shown are for illustration purposes only.
The weakest portion of the stock LCA and stock rubber bushing has been eliminated and replaced with a teflon lined self-lubricating high strength rod end.
Eliminates the need for installation of vario-centric camber kit.
Length adjustable +/- 0.5 inches or more than +/-3 degrees of camber adjustment.
Reduces or eliminates shimming the upper control arm for caster adjustment since the LCA can be angled forward by as much as 14 degrees by adjustable strut rods to increase caster unlike original bushings that bind when angled too far forward.
Reduces or eliminates shimming the upper control arm for camber adjustment
Less shimming of the upper control arm means more room for large front tires inside the fender well.
Chrome Moly High Strength Rod end with teflon/kevlar self-lubricating insert rated at 28,000 lbs tensile strength.
Threaded thick wall DOM tube with laser cut steel saddles designed to self-center in the end of your LCAs.
13 gauge (0.106) steel boxing plates.
6061 T6 Aluminum spacers and bushings.
Includes all spacers, bushings, rod end seals, castle nuts, grease zerks and cotter pins.
Comes complete with detailed instructions. Some welding is required.
With over 30 years of engineering design and steel construction experience, you can be assured that these products have been fully tested and are made to last. 60 day money back guarantee. Just return the items in undamaged condition if your not satisfied.